ABS Modulator - Control Unit Removal and Installation: Installation
WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
- Install the ABS modulator-control unit onto the bracket.
- Install the bracket with the ABS modulator-control unit to the body.
- Reconnect the six brake lines, then tighten the flare nuts to the specified torque.
- Align the connecting surface of the ABS modulator-control unit 25P connector to the ABS modulator-control unit.
- Lower the lock of the ABS modulator-control unit 25P connector, then confirm the connector is fully seated.
- Install the washer reservoir (see WIPER ARM REPLACEMENT ).
- Bleed the brake system (see BRAKE SYSTEM BLEEDING ).