ABS Modulator-Control Unit Inputs and Outputs For 25P Connector
WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
TERMINAL REFERENCE TABLE
| Terminal number | Wire color | Terminal sign | Description | Signal |
|---|---|---|---|---|
| 1 | WHT | CAN-H | F-CAN communication circuit | -- |
| 2 | GRN | FR+B | Detects right-front wheel speed sensor signal | -- |
| 3 | GRY | FL-GND | Detects left-front wheel speed sensor signal | -- |
| 5 | RED | RL-GND | Detects left-rear wheel speed sensor signal | -- |
| 6 | LT BLU | RR+B | Detects right-rear wheel speed sensor signal | -- |
| 8 | WHT | FSR+B | Power source for the fail-safe relay | Battery voltage (about 12 V) at all times |
| 9 | RED | MR+B | Power source for the motor relay | Battery voltage (about 12 V) at all times |
| 10 | BLU | K-LINE | Communication with HDS | -- |
| 12 | ORN | FL+B | Detects left-front wheel speed sensor signal | -- |
| 14 | YEL | RL+B | Detects left-rear wheel speed sensor signal | -- |
| 15 | GRY | RR-GND | Detects right-rear wheel speed sensor signal | -- |
| 16 | PUR | IG1 | Power source for activating the system | With ignition switch ON (II): battery voltage (about 12 V) |
| 17 | RED | CAN-L | F-CAN communication circuit | -- |
| 18 | PNK | FR-GND | Detects right-front wheel speed sensor signal | -- |
| 24 | BLK | GND | Ground for the ABS modulator-control unit | Less than 0.2 V at all times |
| 25 | BLK | MR-GND | Ground for the pump motor | Less than 0.2 V at all times |