LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> Fit >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Abs (Anti-Lock Brake System)) >> Wheel Speed Sensor Replacement >> Front
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wheel Speed Sensor Replacement: Front

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to LOCK (0).
  2. Remove the grommet (A), then disconnect the wheel speed sensor connector (B).
    Fig 1: Identifying Wheel Speed Sensor Replacement Components (Front) With Torque Specifications
    G00492823Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bracket (C), the clip (D), and the wire guide grommet (E).
  4. Remove the bolt and the wheel speed sensor (F).
  5. Install the wheel speed sensor in the reverse order of removal, and note these items:
    • Do not twist the sensor wires.
    • If the wheel speed sensor comes in contact with the wheel bearing, it is faulty.
    • Make sure the grommet is installed properly.
scientia non olet · About LEMON Manuals