CMP Sensor Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Remove the air cleaner (see AIR CLEANER REMOVAL/INSTALLATION ).
Remove the cowl cover and the under-cowl panel (see COWL COVER REPLACEMENT ).
Disconnect the CMP sensor 3P connector (A.

Fig 1: CMP Sensor 3P With Torque Specifications, Connector And O-Ring
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the CMP sensor (B).
Install the sensor in the reverse order of removal with a new O-ring (C).