MAF Sensor/IAT Sensor Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the MAF sensor/IAT sensor 5P connector (A).

Fig 1: MAF Sensor/IAT Sensor 5P Connector, Screws With Torque Specifications And Gasket
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the screws (B).
Remove the MAF sensor/IAT sensor (C).
Install the parts in the reverse order of removal with a new gasket (D).