Passenger's Power Window Switch Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The illustration shows the front passenger's power window switch.

Remove the armrest trim:
- Front passenger's (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
- Rear passenger's (see REAR DOOR PANEL REMOVAL/INSTALLATION ).
Remove the switch panel from the door panel.
Disconnect the 8P connector (A) from the passenger's power window switch (B).

Fig 1: Identifying 8P Connector And Passenger's Power Window Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the four screws and the switch (A).

Fig 2: Identifying Screws And Switch-Reverse
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the switch in the reverse order of removal.