Voice Control Switch Removal/Installation

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service.

1. Remove the driver's airbag assembly (see DRIVER'S AIRBAG REPLACEMENT ).
2. Turn the steering wheel to right, then loosen the screw from the back to the steering wheel.
   Fig 1: Turning Steering Wheel To Right

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Remove the screws (A) from the steering wheel.
   Fig 2: Identifying Steering Wheel Trim And Screws

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Disconnect the connectors, and remove the steering wheel trim (B).
5. Remove the screws (A) and the HFL-navigation voice control switch (B).
   Fig 3: Identifying HFL-Navigation Voice Control Switch, Screws, Cover And Set Plate

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
6. Remove the cover (C), screws (D) and set plate (E) from the HFL-navigation voice control switch.
7. Install the HFL-navigation voice control switch in the reverse order of removal.