Climate Control Unit Removal/Installation
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the audio unit, (see AUDIO UNIT REMOVAL/INSTALLATION )
- Remove the self-tapping screws, bolts, and the brackets (A).
- Remove the self-tapping screws and separate the audio unit and the climate control unit (B).
- Install the control unit in the reverse order of removal. After installation, operate the various functions to see whether works properly.
- Run the self-diagnostic function to confirm that there are no problems in the system, (see GENERAL TROUBLESHOOTING INFORMATION )