Rear Power Window Switch Test/Replacement
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear door panel (see REAR DOOR PANEL REMOVAL/INSTALLATION .
- Remove the screws and disconnect the connector (A) from the rear power window switch (B), them remove the switch assembly from the door panel.
- Remove the three screws and the rear power window switch (A).
- Swap the rear power window switch with an other known-good rear power window switch and test. If the original power window switch is faulty; replace it.
- Install the switch in the reverse order of removal.