Drive Unit Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Remove the left D pillar trim (see TRIM REMOVAL/INSTALLATION - PILLAR AREAS ).
Disconnect the 2P and 8P connectors (A) from the drive unit (B).

Fig 1: Identifying Connectors & Drive Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Carefully remove the bolts and support strut (C) from the tailgate.
Remove the mounting four bolts and drive unit.
Install in the reverse order of removal.