How to Clear Error History

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Do the steps in How to check Error History.
Select Clear in the error menu.
NOTE:
- By selecting Clear, all software and hardware errors stored in history are erased at the same time.
- Save is for factory use only.
- Write down the DTCs and error history before deleting.
Hard error history is displayed

Fig 1: Identifying Screen Display - Hard Error
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Soft error history is displayed (Soft errors are for factory use only)

Fig 2: Identifying Screen Display - Soft Error
Courtesy of AMERICAN HONDA MOTOR CO., INC.
After selecting Clear, then selecting Yes, both Hard Error history and Soft Error history are cleared at the same time.
Hard error history clear

Fig 3: Identifying Screen Display - Hard Error
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Soft error history clear (Soft errors are for factory use only)

Fig 4: Identifying Screen Display - Soft Error
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Press Return to exit.