DTC B1058: Relay Control Module Lost Communication With Door Multiplex Control Unit (Door Lock Switch Message); DTC B1059: Relay Control Module Lost Communication With Door Multiplex Control Unit (Panic Message)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
).
- Clear the DTCs with the HDS.
- Turn the ignition switch to LOCK (0) and then back to ON (II).
- Wait for at least 6 seconds.
- Check for DTCs with the HDS.
Are DTCs B1058 and/or B1059 indicated?
YES -Go to step 5.
NO -Intermittent failure, the system is OK at this time. Check for loose or poor connections. ■
- Check for DTCs with the HDS.
B1058: Are DTCs B1006 and B1160 also indicated? B1059: Is DTC B1010 also indicated?
YES -Do the door multiplex control unit input test (see DOOR MULTIPLEX CONTROL UNIT INPUT TEST ). ■
NO -Do the relay control module input test (see RELAY CONTROL MODULE INPUT TEST ). ■