Removal & Installation
- Using scan tool, retrieve and record all Diagnostic Trouble Codes (DTCs). Ensure ignition switch is in OFF position. Disconnect negative battery cable.
- Locate PCM. See LOCATING POWERTRAIN CONTROL MODULE (PCM) . Disconnect PCM harness connector. Remove PCM mounting screws or clips. Remove PCM.
- To install, reverse removal procedure. Ensure all harness and cable connections are clean and tight.
LOCATING POWERTRAIN CONTROL MODULE (PCM)
| Application | PCM Location |
|---|---|
| Santa Fe (2.4L) | Under Center Of Dash |
| Sonata (2.4L) | Behind Lower Center Of Dash |
| XG350 | Behind Center Of Dash |