LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Veloster Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Control System Diagnosis (2 Of 2) - Non-Turbo >> DTC P2251: O2 Sensor Reference Ground Circuit Open (Bank 1 Sensor 1) >> Wiring Inspection >> Terminal & Connector Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Terminal & Connector Inspection

  1. Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Has a problem been found?

    YES 

    Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure

    NO 

    Go to "VERTUAL GROUND OUTPUT CIRCUIT INSPECTION " procedure.

scientia non olet · About LEMON Manuals