Repair Procedures: Installation

Install in the reverse order of removal.
CAUTION:
- New shift lever assembly is mounted in the 4th fixing pin.
  After installation, remove the 4th fixed pin.
- After installing the select cable and shift cable socket, check portion (A) to see if it projects outwards from the cap. Refer to (Fig 1).
  
  Fig 1: Installing Select Cable And Shift Cable Socket
  Courtesy of HYUNDAI MOTOR AMERICA
- Check operating of lever of transaxle side when operating shift lever after assembly. (1-6, R)
- If there is sticky feel, adjust the control cable length again.
  (Refer to Control Cable - "INSTALLATION ")