All Automatic Functions Inoperative

If all automatic system functions are inoperative, perform the following procedures in order listed.

• Perform self-diagnostics. See SELF-DIAGNOSTIC SYSTEM  .
• Test steering column tilt sensor. Perform DIAGNOSTIC PROCEDURE NO. 3: TILT SENSOR CHECK under SYSTEM TESTS. See Figure .
• Test steering column telescopic sensor. Perform DIAGNOSTIC PROCEDURE NO. 4: TELESCOPIC SENSOR CHECK under SYSTEM TESTS. See Figure .
• Test cancel switch. Perform DIAGNOSTIC PROCEDURE NO. 18: CANCEL SWITCH CHECK under SYSTEM TESTS. See Figure .
• Test key, detention, door switch and vehicle speed sensor. Perform DIAGNOSTIC PROCEDURE NO. 19: KEY, DETENTION, DOOR SWITCH & VEHICLE SPEED SENSOR (VSS) CHECK under SYSTEM TESTS. See Figure and Figure .