Section 4 (Engine Controls - Self-Diagnostics - Introduction): Introduction: Notes

WARNING: This page is about a different car, the 2000 Infiniti Q45 and 2000 Infiniti G20. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For self-diagnostic information on I30, refer to Maxima in Nissan SELF-DIAGNOSTICS - INTRODUCTION (EXC. G20 & QX4) article. For self-diagnostic information on QX4, refer to Pathfinder in Nissan SELF-DIAGNOSTICS - INTRODUCTION (EXC. G20 & QX4) article.

NOTE: Electronic Concentrated Control System (ECCS) control module is referred to as Engine Control Module (ECM).

If no faults were found while performing BASIC DIAGNOSTIC PROCEDURES, proceed with self-diagnostics. Using scan tool, review and record all DTC and freeze-frame information available. If no DTCs are present after entering self-diagnostics, proceed to TROUBLE SHOOTING - NO CODES article for diagnosis by symptom (i.e., ROUGH IDLE, NO START, etc.).