TAC Module Inspection Table For Consult-II
CONSULT-II TAC MODULE INSPECTION
| Monitor item | Display representation | Condition | Standard value or indication | Diagnostic Procedure (When voltage is outside specifications) |
|---|---|---|---|---|
| THRTL POS SEN [V] | Sensor voltage [V] | Throttle valve fully-closed | Approx. 0.5V | 14 |
| THRTL POS SE2 | Sensor voltage [V] | Idling | Approx. 3.4V | 15 |
| TH OPEN SIG | Motor throttle target position signal [ms] | TCS not operating | Approx. 9 ms | 16 |
| START SIGNAL | ON/OFF | Key switch ON | ON | 21 |
| NEUT POSI SW | ON/OFF | Switch in Park/Neutral | ON | 22 |