LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> FX45 >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Disassembly And Assembly >> Assembly >> Mainshaft Assembly
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Mainshaft Assembly

  1. Install needle bearing to mainshaft.
    CAUTION: Apply ATF to periphery of needle bearing.
  2. Install sprocket and electric controlled coupling to mainshaft.
  3. Install spacer to main shaft.
    Fig 1: Installing Needle Bearing
    G00725314Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Install snap ring to mainshaft.
    CAUTION: Do not reuse snap ring.
  5. Install mainshaft assembly to rear case, then install front case and rear case. Refer to FRONT CASE AND REAR CASE .
    Fig 2: Installing Snap Ring To Mainshaft.
    G00725315Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals