With GST
- Check the coolant level in the reservoir tank and radiator. Allow engine to cool before checking coolant level.
If the coolant level in the reservoir tank and/or radiator is below the proper range, skip the following steps and go to
"PROCEDURE A
".
- Confirm whether customer filled the coolant or not. If customer filled the coolant, skip the following steps and go to
"PROCEDURE A
".
- Perform IPDM E/R auto active test and check cooling fan motors operation, refer to
"AUTO ACTIVE TEST
"
- If NG, go to
"PROCEDURE A
".
Courtesy of NISSAN MOTOR CO., U.S.A.