Method B

Remove No. 1 ignition coil.

Fig 1: Removing No. 1 Ignition Coil
Courtesy of NISSAN MOTOR CO., U.S.A.
Connect No. 1 ignition coil and No. 1 spark plug with suitable high-tension wire as shown, and attach timing light clamp to this wire.

Fig 2: Connecting No. 1 Ignition Coil & No. 1 Spark Plug With Suitable High-Tension Wire
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Identifying Insulating Tape Suitable Lengths
Courtesy of NISSAN MOTOR CO., U.S.A.
Check ignition timing.

Fig 4: Checking Ignition Timing (Method B)
Courtesy of NISSAN MOTOR CO., U.S.A.