LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2005 >> G35 x >> Repair and Diagnosis >> Quick Lookups >> Common Specs & Procedures >> Specifications Index
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Specifications Index

G35 COUPE & SEDAN SPECIFICATIONS INDEX

System Specification/Procedure
Air Conditioning
  Service
    Coupe SERVICE DATA AND SPECIFICATIONS (SDS)
    Sedan SERVICE DATA AND SPECIFICATIONS (SDS)
  Torque
    Coupe Refer to applicable components in AUTOMATIC AIR CONDITIONER - G35 COUPE article.
    Sedan Refer to applicable components in AUTOMATIC AIR CONDITIONER - G35 SEDAN article.
Axle Nut/Hub Nut
  Front Hub Nuts (2WD) 78.5-98.1 N.m (58-72 Ft. lbs.)
  Front Axle Nut (AWD) 236-313 N.m (174-230 Ft. lbs.)
  Rear Axle Nut 206-274 N.m (152-202 Ft. lbs.)
Battery
  Coupe BATTERY
  Sedan BATTERY
Brakes
  Bleeding Sequence
    Coupe BLEEDING BRAKE SYSTEM
    Sedan BLEEDING BRAKE SYSTEM
  Disc Brakes
    Front
      Coupe FRONT DISC BRAKE
      Sedan FRONT DISC BRAKE
    Rear
      Coupe REAR DISC BRAKE
      Sedan REAR DISC BRAKE
  Torque
    Coupe Refer to applicable components in BRAKE SYSTEM - G35 COUPE article.
    Sedan Refer to applicable components in BRAKE SYSTEM - G35 SEDAN article.
Charging
  Generator
    Coupe ALTERNATOR
    Sedan ALTERNATOR
  Torque
    Coupe REMOVAL AND INSTALLATION
    Sedan REMOVAL AND INSTALLATION
Drive Belts
  Adjustment
    Coupe TENSION ADJUSTMENT
    Sedan TENSION ADJUSTMENT
  Belt Routing
    Coupe DRIVE BELT
    Sedan DRIVE BELT
Engine Cooling
  General Service Specifications
    Coupe SERVICE DATA AND SPECIFICATIONS (SDS)
    Sedan SERVICE DATA AND SPECIFICATIONS (SDS)
  Radiator Cap Pressure
    Coupe & Sedan 78-98 kPa (0.8-1.0 kgf/cm2 , 11-14 psi)
  Thermostat R & I
    Coupe WATER INLET AND THERMOSTAT ASSEMBLY
    Sedan WATER INLET AND THERMOSTAT ASSEMBLY
  Water Pump R & I
    Coupe WATER PUMP
    Sedan WATER PUMP
Engine Mechanical
  Compression
    Coupe GENERAL SPECIFICATIONS
    Sedan GENERAL SPECIFICATIONS
  Oil Pressure
    Coupe & Sedan
      @ Idle 100 kPa (1.0. kgf/cm2 , 15 psi) or more
      @ 2000 RPM 290 kPa (3.0 kgf/cm2 , 42 psi) on more
  Overhaul
    Coupe SERVICE DATA AND SPECIFICATIONS (SDS)
    Sedan SERVICE DATA AND SPECIFICATIONS (SDS)
  Torque
    Coupe Refer to applicable component in ENGINE MECHANICAL - G35 COUPE article.
    Sedan Refer to applicable component in ENGINE MECHANICAL - G35 SEDAN article.
Fluid Specifications See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. Also, refer to Technical Service Bulletin INFINITI; SPECIAL AUTOMATIC TRANSMISSION FLUID REQUIREMENT .
Flywheel/Flex Plate (Drive Plate) Torque
  Coupe & Sedan
    AT & MT 88 N.m (65 Ft. lbs.)
Fuel System
  Pressure
    Coupe & Sedan At Idling: Approximately 350 kPa (3.57 kg/cm2 , 51 psi)
  Fuel Pressure Test Procedure
    Coupe FUEL PRESSURE CHECK
    Sedan FUEL PRESSURE CHECK
  Fuel Filter Location
    Coupe & Sedan In Tank Type
Ignition
  Firing Order & Cylinder Identification
    Coupe FIRING ORDER & CYLINDER IDENTIFICATION
    Sedan FIRING ORDER & CYLINDER IDENTIFICATION
  Ignition Wires (Resistance) NA
  Ignition Wires (Routing) NA
  Spark Plugs
    Coupe SPARK PLUG
    Sedan SPARK PLUG
Starting
  Starter
    Coupe STARTING SYSTEM
    Sedan STARTING SYSTEM
  Torque
    Coupe Refer to applicable components under REMOVAL AND INSTALLATION .
    Sedan Refer to applicable components under REMOVAL AND INSTALLATION .
Wheel Alignment
  Adjustment Specifications
    Front
      Coupe SERVICE DATA
      Sedan SERVICE DATA
    Rear
      Coupe SERVICE DATA
      Sedan SERVICE DATA
  Torque
    Front
      Coupe Refer to applicable components in FRONT SUSPENSION - COUPE article.
      Sedan Refer to applicable components in FRONT SUSPENSION - SEDAN article.
    Rear
      Coupe Refer to applicable components in REAR SUSPENSION - COUPE article.
      Sedan Refer to applicable components in REAR SUSPENSION - SEDAN article.
Wheel & Tire
  Lug Nut Torque
    Coupe & Sedan 108 N.m (11 kg-m, 80 Ft. lbs)
How To Use Nissan/Infiniti Service Information
  Includes:
Standard Bolt Torque
Symbol Identification
General Connector Info
GENERAL INFORMATION - COUPE
GENERAL INFORMATION - SEDAN