| SLIDE SW-FR |
"ON/OFF" |
ON/OFF status judged from the sliding switch (FR) signal is displayed. |
| SLIDE SW-RR |
"ON/OFF" |
ON/OFF status judged from the sliding switch (RR) signal is displayed. |
| RECLIN SW-FR |
"ON/OFF" |
ON/OFF status judged from the reclining switch (FR) signal is displayed. |
| RECLIN SW-RR |
"ON/OFF" |
ON/OFF status judged from the reclining switch (RR) signal is displayed. |
| LIFT FR SW-UP |
"ON/OFF" |
ON/OFF status judged from the FR lifter switch (UP) signal is displayed. |
| LIFT FR SW-DN |
"ON/OFF" |
ON/OFF status judged from the FR lifter switch (DOWN) signal is displayed. |
| LIFT RR SW-UP |
"ON/OFF" |
ON/OFF status judged from the RR lifter switch (UP) signal is displayed. |
| LIFT RR SW-DN |
"ON/OFF" |
ON/OFF status judged from the RR lifter switch (DOWN) signal is displayed. |
| MIR CON SW-UP |
"ON/OFF" |
ON/OFF status judged from the door mirror remote control switch (UP) signal is displayed. |
| MIR CON SW-DN |
"ON/OFF" |
ON/OFF status judged from the door mirror remote control switch (DOWN) signal is displayed. |
| MIR CON SW-RH |
"ON/OFF" |
ON/OFF status judged from the door mirror remote control switch (RIGHT) signal is displayed. |
| MIR CON SW-LH |
"ON/OFF" |
ON/OFF status judged from the door mirror remote control switch (LEFT) signal s displayed. |
| MIR CHNG SW-R |
"ON/OFF" |
ON/OFF status judged from the door mirror remote control switch (switching to RIGHT) signal is displayed. |
| MIR CHNG SW-L |
"ON/OFF" |
ON/OFF status judged from the door mirror remote control switch (switching to LEFT) signal is displayed. |
| SET SW |
"ON/OFF" |
ON/OFF status judged from the setting switch signal is displayed. |
| TELESCO SW-FR |
"ON/OFF" |
ON/OFF status judged from the telescoping switch (FR) signal is displayed. |
| TELESCO SW-RR |
"ON/OFF" |
ON/OFF status judged from the telescoping switch (RR) signal is displayed. |
| TILT SW-UP |
"ON/OFF" |
ON/OFF status judged from the tilt switch (UP) signal is displayed. |
| TILT SW-DOWN |
"ON/OFF" |
ON/OFF status judged from the tilt switch (DOWN) signal is displayed. |
| MEMORY SW1 |
"ON/OFF" |
ON/OFF status judged from the seat memory switch 1 signal is displayed. |
| MEMORY SW2 |
"ON/OFF" |
ON/OFF status judged from the seat memory switch 2 signal is displayed. |
| CANCEL SW |
"ON/OFF" |
Setting status is displayed with the display unit: "Active (ON)/inactive (OFF)" |
| DOOR SW DR |
"ON/OFF" |
ON (Door open) / OFF (door closed) status judged from the driver door switch is displayed. |
| VHCL SPEED SE |
"7km/7km" |
The present vehicle speed (less than 7 km/h (4 MPH), or 7 km/h (4 MPH) or higher) is displayed. |
| DETENT SW |
"ON/OFF" |
The selector lever position "ON (P position) / OFF (other than P position)" judged from the detention switch signal is displayed. |
| IGN ON SW |
"ON/OFF" |
Ignition key switch ON (IGN ON)/OFF (ignition switch START, ACC, or OFF) status judged from the ignition switch signal is displayed. |
| IGN ACC SW |
"ON/OFF" |
Ignition key switch ON (ACC or IGN ON)/ OFF (ignition switch START, or OFF) status judged from the ignition switch signal is displayed. |
| IGN START SW |
"ON/OFF" |
Ignition key switch ON (START, ON) /OFF (ignition switch IGN, ACC, or OFF) status judged from the ignition switch signal is displayed. |
| IGN KEY SW |
"ON/OFF" |
Key inserted (ON)/key removed (OFF) status judged from the key detection switch is displayed. |
| R POSITION SW |
"ON/OFF" |
R position (ON)/Other than R position of shift position signal from backup lamp relay is displayed. |
| TILT SEN |
"V" |
The tilt position (voltage) judged from the tilt sensor signal is displayed. |
| TELESCO SEN |
"V" |
The telescoping position (voltage) judged from the telescoping sensor signal is displayed. |
| MIR/SE RH R-L |
"ON/OFF" |
ON (normal value)/OFF (abnormal value)
of voltage value judged from RH door mirror sensor output voltage (LH/RH) is displayed. |
| MIR/SE RH U-D |
"ON/OFF" |
ON (normal value)/OFF (abnormal value)
of voltage value judged from RH door mirror sensor output voltage (UP/DOWN) is displayed. |
| MIR/SE LH R-L |
"ON/OFF" |
ON (normal value)/OFF (abnormal value)
of voltage value judged from LH door mirror sensor output voltage (LH/RH) is displayed. |
| MIR/SE LH U-D |
"ON/OFF" |
ON (normal value)/OFF (abnormal value)
of voltage value judged from LH door mirror sensor output voltage (UP/DOWN) is displayed. |