Inspection Procedure

Check self-diagnosis results.

Is above displayed in the self-diagnosis display item? 

1. YES: GO TO 2.
2. NO: INSPECTION END.

1. Connect CONSULT-II. Start engine.
2. In "DATA MONITOR" select "ITEM MENU" and then check P position.
   DATA MONITOR CHECK
   
   

   Selector lever position	Position (Data monitor)
   P position	ON
   Other than P position	OFF

OK or NG 

1. OK: Perform VDC/TCS/ABS control unit self-diagnosis again.
2. NG: GO TO 3.

Perform Park/Neutral position switch inspection. Refer to "DTC P0705: PARK/NEUTRAL POSITION SWITCH ".

Do any self-diagnosis items appear? 

1. YES: Repair indicated items and perform VDC/TCS/ABS control unit self-diagnosis again.
2. NO: Perform VDC/TCS/ABS control unit self-diagnosis again.