Specifications Index
Q45 SPECIFICATIONS INDEX
| System | Specification/Procedure | |||
|---|---|---|---|---|
| Air Conditioning | ||||
| Service | SERVICE DATA AND SPECIFICATIONS (SDS) | |||
| Torque | See applicable components in AUTOMATIC AIR CONDITIONER aricle. | |||
| Axle Nut/Hub Nut | ||||
| Front Spindle/Hub Nut | 206-284 N.m (152-209 Ft. lbs.) | |||
| Rear Axle Nut | 206-274 N.m (152-202 Ft. lbs.) | |||
| Battery | BATTERY | |||
| Brakes | ||||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | |||
| Disc Brakes | ||||
| Front | FRONT DISC BRAKE | |||
| Rear | REAR DISC BRAKE | |||
| Torque | Refer to applicable components in BRAKE SYSTEM article. | |||
| Charging | ||||
| Generator | ALTERNATOR | |||
| Torque | REMOVAL AND INSTALLATION | |||
| Drive Belts | ||||
| Adjustment | TENSION ADJUSTMENT | |||
| Belt Routing | DRIVE BELTS | |||
| Engine Cooling | ||||
| General Service Specifications | SERVICE DATA AND SPECIFICATIONS (SDS) | |||
| Radiator Cap Pressure | 78-98 kPa (0.8-1.0 kgf/cm2 , 11-14 psi) | |||
| Thermostat R & I | THERMOSTAT AND WATER CONTROL VALVE | |||
| Water Pump R & I | WATER PUMP | |||
| Engine Mechanical | ||||
| Compression | GENERAL SPECIFICATIONS | |||
| Oil Pressure | ||||
| @ Idle | 98 kPa (1.0.8 kgf/cm2 , 14 psi) or more | |||
| @ 2000 RPM | 294 kPa (3.0 kgf/cm2 , 43 psi) on more | |||
| Overhaul | SERVICE DATA AND SPECIFICATIONS (SDS) | |||
| Torque | See applicable component in ENGINE MECHANICAL article. | |||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. Also, refer to Technical Service Bulletin INFINITI; SPECIAL AUTOMATIC TRANSMISSION FLUID REQUIREMENT . | |||
| Flywheel/Flex Plate (Drive Plate) Torque | 88.3 N.m (65 Ft. lbs.) | |||
| Fuel System | ||||
| Fuel Pressure | At Idling: Approximately 350 kPa (3.57 kg/cm2 , 51 psi) | |||
| Fuel Pressure Test Procedure | FUEL PRESSURE CHECK | |||
| Fuel Filter Location | In Tank Type | |||
| Ignition | ||||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | |||
| Ignition Wires (Resistance) | NA | |||
| Ignition Wires (Routing) | NA | |||
| Spark Plugs | SPARK PLUG (PLATINUM-TIPPED TYPE) | |||
| Starting | ||||
| Starter | STARTER | |||
| Torque | REMOVAL AND INSTALLATION | |||
| Wheel Alignment | ||||
| Adjustment Specifications | ||||
| Front | SERVICE DATA | |||
| Rear | SERVICE DATA | |||
| Torque | ||||
| Front | See applicable components in FRONT SUSPENSION article. | |||
| Rear | See applicable components in REAR SUSPENSION article. | |||
| Wheel & Tire | ||||
| Lug Nut Torque | 98-118 N.m (10-12 kg-m, 72-87 Ft. lbs) | |||
| How To Use Nissan/Infiniti Service Information | ||||
| Includes: Standard Bolt Torque Symbol Identification General Connector Info |
GENERAL INFORMATION | |||