System Description: Inputs

Power is supplied at all times

• To BCM terminal 70
• Through 50A fusible link (letter f  , located in the fuse and fusible link box).
• To BCM terminal 57
• Through 15A fuse [No. 22, located in the fuse block (J/B)].

When the key is inserted in the key switch and key lock solenoid, power is supplied

• To BCM terminal 37
• Through key switch and key lock solenoid terminals 3 and 4
• Through 10A fuse [No. 19, located in the fuse block (J/B)].

When the ignition switch is ACC or ON, power is supplied

• To BCM terminal 11
• Through 10A fuse [No. 4, located in the fuse block (J/B)].

When the ignition switch is ON or START, power is supplied

• To BCM terminal 38
• Through 10A fuse (No. 59, located in the fuse and relay box).

When the front door switch LH is ON (door is OPEN), ground is supplied

• To BCM terminal 47
• Through front door switch LH terminal 2
• Through front door switch LH case ground.

When the front door switch RH is ON (door is OPEN), ground is supplied

• To BCM terminal 12
• Through front door switch RH terminal 2
• Through front door switch RH case ground.

When the rear door switch LH is ON (door is OPEN), ground is supplied

• To BCM terminal 48
• Through rear door switch LH terminal 2
• Through rear door switch LH case ground.

When the rear door switch RH is ON (door is OPEN), ground is supplied

• To BCM terminal 13
• Through rear door switch RH terminal 2
• Through rear door switch RH case ground.

When the back door latch (door ajar switch) is ON (door is OPEN), ground is supplied

• To BCM terminal 43
• Through back door latch (door ajar switch) terminal 7,
• Through back door latch (door ajar switch) terminal 8,
• Through body grounds B7 and B19.

Keyfob signal is input into the BCM from the remote keyless entry receiver. The remote keyless entry system controls operation of the

• Power door lock
• Back door opener
• Interior lamp and step lamps
• Panic alarm
• Hazard and horn reminder
• Keyless power window down (open)
• Auto door lock operation