Component Function Check

1. Turn ignition switch ON.
2. Select "RECLN SW-FR", "RECLN SW-RR" in "Data monitor" mode with CONSULT-III.
3. Check reclining switch signal under the following conditions.
   MONITOR ITEM CONDITION CHART
   
   

   Monitor item	Condition		Status
   RECLINE SW-FR	Reclining switch (forward)	Operate	ON
   		Release	OFF
   RECLINE SW-RR	Reclining switch (backward)	Operate	ON
   		Release	OFF

Is the indication normal? 

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".