Component Inspection

1. Turn ignition switch OFF.
2. Disconnect malfunction front door switch connector.
3. Check malfunction front door switch.
   CONTINUITY SPECIFICATION
   
   

   (+)			(-)	Condition	Continuity
   Front door switch
   Connector		Terminal
   Driver side	B16	2	Ground part of door switch	Door switch pressed	Not exist
   				Door switch released	Exists
   Passenger side	B216	2		Door switch pressed	Not exist
   				Door switch released	Exists

Is the inspection result normal? 

YES: Front door switch is OK.

NO: Replace malfunction front door switch. Refer to REMOVAL AND INSTALLATION .