LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> EX35 Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> On-Vehicle Repair >> Steering Angle Sensor >> Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Installation

Note the following, and install in the reverse order of removal.

CAUTION:
  • Never reuse steering angle sensor.
  • When installing steering angle sensor, tighten it to the specified torque with an electric screwdriver. Be sure to tighten it completely with no floating and tilting.
  • After work, make sure to adjust neutral position of steering angle sensor. Refer to DESCRIPTION  .
scientia non olet · About LEMON Manuals