LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> EX35 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P1217 To P2A03 >> P1239, P2135 TP Sensor >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

  1. CHECK GROUND CONNECTION
    1. Turn ignition switch OFF.
    2. Check ground connection M95. Refer to Ground Inspection in "CIRCUIT INSPECTION ".

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Repair or replace ground connection.

  2. CHECK THROTTLE POSITION SENSOR POWER SUPPLY CIRCUIT-I
    1. Disconnect electric throttle control actuator harness connector.
    2. Turn ignition switch ON.
    3. Check the voltage between electric throttle control actuator harness connector and ground.
      VOLTAGE SPECIFICATIONS

      DTC Electric throttle control actuator Ground Voltage (V)
      Bank Connector Terminal
      P1239 2 F27 1 Ground Approx. 5
      P2135 1 F6 6

    Is the inspection result normal? 

    YES: GO TO 3.

    NO: Repair open circuit or short to ground or short to power in harness or connectors.

  3. CHECK THROTTLE POSITION SENSOR GROUND CIRCUIT FOR OPEN AND SHORT
    1. Turn ignition switch OFF.
    2. Disconnect ECM harness connector.
    3. Check the continuity between electric throttle control actuator harness connector and ECM harness connector.
      CONTINUITY SPECIFICATIONS

      DTC Electric throttle control actuator ECM Continuity
      Bank Connector Terminal Connector Terminal
      P1239 2 F27 4 F101 48 Existed
      P2135 1 F6 3 40
    4. Also check harness for short to ground and short to power.

    Is the inspection result normal? 

    YES: GO TO 4.

    NO: Repair open circuit or short to ground or short to power in harness or connectors.

  4. CHECK THROTTLE POSITION SENSOR INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT
    1. Check the continuity between electric throttle control actuator harness connector and ECM harness connector.
      CONTINUITY SPECIFICATIONS

      DTC Electric throttle control actuator ECM Continuity
      Bank Connector Terminal Connector Terminal
      P1239 2 F27 2 F101 31 Existed
      3 35
      P2135 1 F6 4 30
      5 34
    2. Also check harness for short to ground and short to power.

    Is the inspection result normal? 

    YES: GO TO 5.

    NO: Repair open circuit or short to ground or short to power in harness or connectors.

  5. CHECK THROTTLE POSITION SENSOR

    Refer to "COMPONENT INSPECTION ".

    Is the inspection result normal? 

    YES: GO TO  7.

    NO: GO TO 6.

  6. REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR
    1. Replace malfunctioning electric throttle control actuator.
    2. "SPECIAL REPAIR REQUIREMENT "

    INSPECTION END

  7. CHECK INTERMITTENT INCIDENT

    Refer to "INTERMITTENT INCIDENT ".

    INSPECTION END

scientia non olet · About LEMON Manuals