Component Inspection

1. Turn ignition switch OFF.
2. Disconnect exhaust valve timing control magnet retarder harness connector.
3. Check resistance between exhaust valve timing control magnet retarder terminals as follows.
   RESISTANCE SPECIFICATIONS
   
   

   Terminals	Resistance
   1 and 2	9.0 - 11.0 Ω [at 20°C (68°F)]

Is the inspection result normal? 

YES: INSPECTION END

NO: GO TO 2.

1. Replace malfunctioning exhaust valve timing control magnet retarder.
2. Perform "EXHAUST VALVE TIMING CONTROL LEARNING : SPECIAL REPAIR REQUIREMENT ".

   INSPECTION END