System Setting Procedure

Setting of welcome light function can be changed by following procedure. (for system setting by CONSULT-III: refer to CONSULT-III FUNCTION (BCM - INTELLIGENT KEY)  .)

1. Confirm Intelligent Key is removed from key slot.
2. Turn ignition switch ON and press and hold request switch (driver side) more than 5 seconds.
3. Confirm sounds of buzzer (combination meter).

   Pi, Pi, Pi... (approx. 1.2 sec.): Welcome light function is OFF. 

   Pi, Pi, Pi...(approx. 2.4 sec.): Welcome light function is ON.