Detailed Flow
- INTERVIEW FOR MALFUNCTION
Interview the conditions and environment when occurring any malfunction to the customer.
GO TO 2.
- SYMPTOM CHECK
- Check the symptom from the customer's information.
- Check that any malfunction occurs other than the malfunction interviewed from the customer.
GO TO 3.
- INSPECTION BEFORE DIAGNOSIS
Check the following conditions of the sensor.
- Check if the sonar sensor is not frozen.
- Check if snow, mud, or other foreign objects are not adhering to the sonar sensor.
- Check if there is no deformation, scratches, or other damage to the sonar sensor.
- Check if water has not accumulated in the sonar sensor.
Is the sensor condition normal?
YES: GO TO 4.
NO: Repair the sensor condition.
- SELF-DIAGNOSIS WITH CONSULT-III RESULT INSPECTION
Perform the self-diagnosis with CONSULT-III.
Is the inspection result normal?
YES: GO TO 5.
NO: GO TO 6.
- MALFUNCTIONING PART EXTRACTION BY SYMPTOM DIAGNOSIS
Repair the malfunctioning part by the symptom diagnosis.
GO TO 6.
- FINAL INSPECTION
Check that the sonar system activates normally.
Does the sonar system activate normally?
YES: INSPECTION END
NO: GO TO 1.