Self Diagnosis Result
- In CONSULT-III self-diagnosis, self-diagnosis results and error history are displayed simultaneously.
- The timing is displayed as "0" if any of the error codes [U1000], [U1010], [U1300] or [U1310] are detected. The counter increases by 1 if the condition is normal at the next ignition switch ON cycle.
Self-diagnosis results display item
SELF-DIAGNOSIS RESULTS DISPLAY ITEM
| Error item | Description | Possible malfunction factor/Action to take |
|---|---|---|
| CAN COMM CIRCUIT [U1000] | CAN communication malfunction is detected. | Perform diagnosis with CONSULT-III, and then repair the malfunctioning parts according to the diagnosis results. Refer to DIAGNOSIS PROCEDURE . |
| CONTROL UNIT (CAN) [U1010] | CAN initial diagnosis malfunction is detected. | Replace AV control unit. |
| CONTROL UNIT (AV) [U1310] | AV communication circuit initial diagnosis malfunction is detected. | |
| Control Unit FLASH-ROM [U1200] | AV control unit malfunction is detected. | |
| CAN CONT [U1216] | ||
| FRONT DISP CONN [U1243] | When either one of the following items are detected:
|
|
| SAT CONN [U1255] | When either one of the following items are detected:
|
|
| CAMERA CONT. CONN [U1250] | Malfunction is detected in camera connection recognition circuit between AV control unit and camera control unit. | Camera-connection recognition circuit between AV control unit and camera control unit. |
|
When either one of the following items are detected:
|
|
|
When either one of the following items are detected:
|
|
WITH REAR VIEW MONITOR
|
Camera control unit power supply or ground circuits malfunction is detected. | Camera control unit power supply and ground circuits. |
|
WITHOUT REAR VIEW MONITOR When either one of the following items are detected:
|
|
| WITH REAR VIEW MONITOR When either one of the following items are detected:
|
|
|
|
Malfunction is detected in AV communication circuits between camera control unit and the junction between AV control unit and multifunction switch. | AV communication circuits between camera control unit and the junction between AV control unit and multifunction switch. |
|
Malfunction is detected in AV communication circuits between AV control unit and the junction between AV control unit and multifunction switch. | AV communication circuits between AV control unit and the junction between AV control unit and multifunction switch. |
|
Malfunction is detected in AV communication circuits between AV control unit and the junction between AV control unit and multifunction switch. | AV communication circuits between AV control unit and the junction between AV control unit and multifunction switch. |