Data Monitor
ALL SIGNALS
- Displays the status of the following vehicle signals inputted into the AV control unit.
- For each signal, actual signal can be compared with the condition recognized on the system.
DISPLAY ITEM REFERENCE
| Display Item | Display | Vehicle status | Remarks |
|---|---|---|---|
| VHCL SPD SIG | On | Vehicle speed > 0 km/h (0 MPH) | Changes in indication may be delayed. This is normal. |
| Off | Vehicle speed = 0 km/h (0 MPH) | ||
| PKB SIG | On | Parking brake is applied. | |
| Off | Parking brake is released. | ||
| ILLUM SIG | On | Light switch ON | - |
| Off | Light switch OFF | ||
| IGN SIG | On | Ignition switch ON | |
| Off | Ignition switch in the ACC position | ||
| REV SIG | On | Shift the selector lever to the "R" position | Changes in indication may be delayed. This is normal. |
| Off | Shift the selector lever to a position other than the "R" position |
SELECTION FROM MENU
Allows the technician to select which vehicle signals should be displayed and displays the status of the selected vehicle signals.
ITEM DESCRIPTION
| Item to be selected | Description |
|---|---|
| VHCL SPD SIG | The same as when "ALL SIGNALS" is selected. |
| PKB SIG | |
| ILLUM SIG | |
| IGN SIG | |
| REV SIG |