DTC Detection Logic
NOTE:
- If DTC B210C is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
- When IPDM E/R power supply voltage is low (Approx. 7 - 8 V for about 1 second), the DTC B210C may be detected.
DTC DETECTION LOGIC TABLE
| DTC No. | Trouble diagnosis name | DTC detecting condition | Possible cause |
|---|---|---|---|
| B210C | START CONT RLY OFF | IPDM E/R detects that the relay is stuck at OFF position even if the followings condition are met for about 1 second.
|
|