LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> EX35 Base, RWD >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brake Control System >> Function Diagnosis >> Diagnosis System [Abs Actuator And Electric Unit (Control Unit)] >> CONSULT-III Function >> Self Diagnostic Result
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Self Diagnostic Result

Operation Procedure

Before performing the self-diagnosis, start engine and drive vehicle at 30 km/h (19 MPH) or more for approximately 1 minute.

Display Item List

Refer to DTC NO. INDEX  .

How to Erase Self-diagnosis Results

After erasing DTC memory, start the engine and drive the vehicle at 30 km/h (19 MPH) or more for approximately 1 minute as the final inspection, and make sure that the ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp and brake warning lamp turn OFF.

CAUTION: If memory cannot be erased, perform applicable diagnosis.
NOTE:
  • When the wheel sensor malfunctions, after inspecting the wheel sensor system, ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp and brake warning lamp will not turn OFF even when the system is normal unless the vehicle is driven at approximately 30 km/h (19 MPH) or more for approximately 1 minute.
  • Brake warning lamp will turn ON in case of parking brake operation (when switch is ON) or in case of brake fluid level switch operation (when brake fluid is insufficient).
  • VDC OFF switch should not stay in "ON" position.
scientia non olet · About LEMON Manuals