Malfunction Indicator Lamp (Mil): Description

The MIL is located on the combination meter.

1. The MIL will light up when the ignition switch is turned ON without the engine running. This is a bulb check.

   If the MIL does not light up, check MIL circuit. Refer to "COMPONENT FUNCTION CHECK ".

2. When the engine is started, the MIL should go off.

   If the MIL remains on, the on board diagnostic system has detected an engine system malfunction.

   Fig 1: Identifying Malfunction Indicator Lamp

   Courtesy of NISSAN MOTOR CO., U.S.A.