Component Inspection

1. Turn ignition switch OFF.
2. Disconnect rear power window switch connector.
3. Check rear power window switch.
   CONTINUITY SPECIFICATION
   
   

   Rear power window switch	Terminal		Rear power window switch condition	Continuity
   D54 (LH) D74 (RH)	1	5	UP	Existed
   	3	4
   	3	4	NEUTRAL
   	2	5
   	1	4	DOWN
   	2	5

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace rear power window switch. Refer to REMOVAL AND INSTALLATION  .