LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Introduction >> Function Diagnosis >> On Board Diagnostic (OBD) System >> Diagnosis Description >> System Readiness Test (SRT) Code >> How to Display SRT Status
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How to Display SRT Status

WITH CONSULT-III 

Selecting "SRT STATUS" in "DTC CONFIRMATION" mode with CONSULT-III.

For items whose SRT codes are set, a "CMPLT" is displayed on the CONSULT-III screen; for items whose SRT codes are not set"INCMP" is displayed.

NOTE: Though displayed on the CONSULT-III screen"HO2S HTR" is not SRT item.

WITH GST 

Selecting Service $01 with GST (Generic Scan Tool)

NO TOOLS 

A SRT code itself can not be displayed while only SRT status can be.

  1. Turn ignition switch ON and wait 20 seconds.
  2. SRT status is indicated as shown below.
    • When all SRT codes are set, MIL lights up continuously.
    • When any SRT codes are not set, MIL will flash periodically for 10 seconds.
      Fig 1: SRT Codes Blinking Pattern
      G04874803Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals