DTC Index
WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Details of time display
- CRNT: Displays when there is a malfunction now or after returning to the normal condition until turning ignition switch OFF → ON again.
- 1 - 39: Displayed if any previous malfunction is present when current condition is normal. It increases like 1 → 2 → 3...38 → 39 after returning to the normal condition whenever ignition switch OFF → ON. The counter remains at 39 even if the number of cycles exceeds it. It is counted from 1 again when turning ignition switch OFF → ON after returning to the normal condition if the malfunction is detected again.
DTC INDEX
| CONSULT display | Detection condition | Fail-safe | Diagnosis |
|---|---|---|---|
| No DTC is detected. further testing may be required. |
- | - | - |
| U1000: CAN COMM CIRCUIT | Intelligent Key unit cannot receive CAN communication signal continuously for 2 seconds or more. | - | Check CAN communication system. Refer to U1000 CAN COMM CIRCUIT |
| U1010: CONTROL UNIT (CAN) | Intelligent Key unit detects internal CAN communication circuit malfunction. | - | Replace Intelligent Key unit. |
| B2013: STRG COMM 1 | The ID verification result between Intelligent key unit and steering lock solenoid are NG. Or Intelligent Key unit cannot communicate with steering lock solenoid. | x | Perform steering lock unit ID registration with CONSULT-III |
| B2552: INTELLIGENT KEY | Intelligent Key unit internal malfunction. | x | Replace Intelligent Key unit. |
| B2590: NATS MALFUNCTION | The ID verification result between Intelligent key unit and BCM are NG. Or Intelligent Key unit cannot communicate with BCM. | x | Check NATS Refer to B2590 ID DISCORD BCM-I-KEY |