Vehicle Security Operation Check

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

INSPECTION START
Turn ignition switch "OFF".

NOTE: Before starting operation check, open front windows.

GO TO 2.
CHECK SECURITY INDICATOR LAMP
1. Lock doors using Intelligent Key or mechanical key.
2. Check that security indicator lamp illuminates for 30 seconds.
Security indicator lamp should illuminate.

OK: GO TO 3.

NG: Perform diagnosis and repair. Refer to "COMPONENT FUNCTION CHECK ".
CHECK ALARM FUNCTION
1. After 30 seconds, security indicator lamp will start to blink.
2. Open any door or hood before unlocking with Intelligent Key or mechanical key, or open back door or glass hatch without the presence of Intelligent Key.
Does the alarm function properly?

YES: GO TO 4.

NO: Check the following.
- The vehicle security system does not phase in alarm mode. Refer to "SYMPTOM TABLE ".
- Alarm (horn and headlamps) does not operate. Refer to "SYMPTOM TABLE ".
CHECK ALARM CANCEL OPERATION
Unlock any door using Intelligent Key or mechanical key.

Alarm (horn and headlamps) should stop.

OK: INSPECTION END.

NG: Check door lock function. Refer to "INTELLIGENT KEY : SYSTEM DESCRIPTION ".