Removal and Installation: BCM: Removal

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring brand-new BCM after installation. Refer to "ID REGISTRATION PROCEDURE ".

Disconnect the battery negative terminal.
Remove the lower knee protector. Refer to "EXPLODED VIEW ".
Remove the screw and release the BCM.
Disconnect the connectors and then remove the BCM.

Fig 1: Identifying Data Link Connector And Steering Column
Courtesy of NISSAN MOTOR CO., U.S.A.