Procedure After Replacing ECM
WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
When replacing ECM, the following procedure must be performed.
- Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs.
Refer to "SYSTEM DIAGRAM ".
- Perform "VIN REGISTRATION ".
- Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING ".
- Perform "THROTTLE VALVE CLOSED POSITION LEARNING ".
- Perform "IDLE AIR VOLUME LEARNING ".