CONSULT-III Function [4WAS(MAIN)/RAS/HICAS]: Function

CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.

CONSULT-III FUNCTION CHART

Diagnostic test mode	Function
Self-diagnostic results	Self-diagnostic results can be read and erased quickly.
Data monitor	Input/Output data in the 4WAS main control unit can be read.
CAN diagnostic support monitor	The results of transmit/receive diagnosis of CAN communication can be read.
Active test	Diagnostic Test Mode in which CONSULT-III drives some actuators apart from the 4WAS main control unit and also shifts some parameters in a specified range.
ECU part number	4WAS main control unit part number can be read.