LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> G35 Sport >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Introduction >> Basic Inspection >> Inspection And Adjustment >> Exhaust Valve Timing Control Learning >> EXHAUST VALVE TIMING CONTROL LEARNING : Special Repair Requirement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EXHAUST VALVE TIMING CONTROL LEARNING : Special Repair Requirement

  1. START

    With CONSULT-III 

    1. Start engine and warm it up to normal operating temperature.
    2. Set selector lever to N position (A/T) or neutral position (M/T) and confirm that following electrical or mechanical loads are not applied.
      • Headlamp switch is OFF
      • Air conditioner switch is OFF
      • Rear defogger switch is OFF
      • Steering wheel is in the straight-ahead position, etc.
    3. Keep the engine speed between 1, 800 and 2, 000 rpm.
    4. Select "EXH V/T CONTROL LEARN" in "WORK SUPPORT" mode with CONSULT-III.
    5. Touch "START" and wait 20 seconds.
    6. Make sure that "CMPLT" is displayed on CONSULT-III screen.

      Learning completed : CMPLT 

      Learning not yet : YET 

    Without CONSULT-III 

    1. Start engine and warm it up to normal operating temperature.
    2. Set selector lever to N position (A/T) or neutral position (M/T) and confirm that following electrical or mechanical loads are not applied.
      • Headlamp switch is OFF
      • Air conditioner switch is OFF
      • Rear defogger switch is OFF
      • Steering wheel is in the straight-ahead position, etc.
    3. Keep the engine speed between 1, 800 and 2, 000 rpm at 20 seconds.

    END

scientia non olet · About LEMON Manuals