Component Inspection [ABS Actuator and Electric Unit (Control Unit)]

1. Turn the ignition switch OFF.
2. Remove ABS actuator and electric unit (control unit). Refer to "EXPLODED VIEW ".
3. Check the resistance between ABS actuator and electric unit (control unit) connector terminals.
   TERMINALS RESISTANCE REFERENCE
   
   

   ABS actuator and electric unit (control unit)		Resistance (Approx.)
   Connector	Terminal
   E41	25 - 45	60 Ω

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace ABS actuator and electric unit (control unit).