Active Test Mode

Description

• 4WAS front actuator assembly activation is checked according to the control signal from CONSULT-III.
• 4WAS front lock solenoid valve (lock structure) activates forcibly (ON/OFF) with each control signal of "LOCK OPERATION". Perform this mode when performing 4WAS front actuator adjustment.
  CAUTION: Never steer the steering wheel during "RELEASE".
• The steering angle sensor neutral point judgment (OK/NG) is performed with each control signal of "SLOW MODE".
  ACTIVE TEST
  
  

  Select test item	Control signal	Remarks
  LOCK OPERATION	RELEASE	4WAS front lock solenoid valve lock is released.
  	LOCK	4WAS front lock solenoid valve lock is applied.
  SLOW MODE	MODE START	Steering angle sensor neutral point check starts. (Turn the steering wheel rightward and leftward slowly. Steer until the turning stops.)
  	MODE END	Steering angle sensor neutral point check ends.