Active Test Mode

Description

• 4WAS rear actuator assembly activation is checked according to the control signal from CONSULT-III.
• The control signal forcibly activates (ON/OFF) 4WAS rear assembly, performs the self-diagnosis and checks each sensor in "SELF DIAGNOSTIC MODE".
  CAUTION: Perform the active test while the vehicle is stopped.
  ACTIVE TEST
  
  

  Select test item	Control signal	Remarks
  SELF DIAGNOSTIC MODE	ON CAUTION: Perform the active test while the vehicle is stopped.	4WAS rear actuator assembly activates. It activates in the same direction as the steering angle by inputting the steering angle.
  	OFF	4WAS rear actuator assembly stops the activation.

  Standard value

  STANDARD VALUE CHART
  
  

  Monitor item	Active test "ON"
  STEERING ANG	0° (Neutral)	R 90°	L 90°
  RR ST ANG-MAI	2.4 V	Approx. 4.4 V	Approx. 0.4 V
  RR ST ANG-SUB	2.4 V	Approx. 4.4 V	Approx. 0.4 V
  MOTOR CURRENT	No output (Approx. 0 A)	Output (change)