Data Monitor Mode
Display Item List
DISPLAY ITEM LIST
| Monitor item (Unit) | Remarks | ||
|---|---|---|---|
| VHCL SPEED SE [km/h] or [mph] | The vehicle speed signal from ABS actuator and electric unit (control unit) is indicated with CAN communication line. | ||
| STEERING ANG [deg] | The steering angle sensor signal from the steering angle sensor is indicated with CAN communication line. | ||
| ENGINE SPEED [RPM] | The engine speed signal from ECM is indicated with CAN communication line. | ||
| STR ANGL SPD [deg/s] | The steering angle speed signal from the steering angle sensor is indicated with CAN communication line. | ||
| POWER STR SOL [A] | The current value of the power steering solenoid valve is indicated. | ||
| RR ST ANG-MAI [V] | The voltage of the rear wheel steering angle sensor (main) is indicated. | ||
| RR ST ANG-SUB [V] | The voltage of the rear wheel steering angle sensor (sub) is indicated. | ||
| RR ST ANG-VOL [V] | The power supply voltage of the rear wheel steering angle sensor is indicated. | ||
| C/U VOLTAGE [V] | The power supply voltage value of 4WAS main control unit is indicated. | ||
| MOTOR VOLTAGE [V] | The voltage value of 4WAS rear motor is indicated. | ||
| MOTOR CURRENT [A] | The current value of 4WAS rear motor is indicated. | ||
| MTR CRNT OPE [A] | The current value input to 4WAS rear motor is indicated. | ||
| RR ANG OPE [deg] | The angle command value is indicated for activate 4WAS rear motor. | ||
| FR ANGLE OPE [deg] | The front wheel angle value transmitted from 4WAS main control unit to 4WAS front control unit is indicated. | ||
| STOP LAMP SW [On/Off] | The stop lamp switch status is indicated. | ||
| HICAS RELAY [On/Off] | 4WAS rear motor relay condition is indicated. | ||
| FAIL SAFE [On/Off] | The fail-safe mode status of 4WAS main control unit is indicated. | ||
| WARNING LAMP [On/Off] | 4WAS warning lamp ON/OFF condition is indicated. | ||
| FRONT ECU FAIL [On/Off] | The fail-safe mode status of 4WAS main control unit transmitted from 4WAS front control unit with 4WAS communication line(1) is indicated. | ||
| FRONT ECU EX [On/Off] | The protection function mode status of 4WAS front control unit transmitted from 4WAS front control unit with 4WAS communication line(1) is indicated. | ||
|
|||